- Brand : GEPRC
- Aircraft model series : crossing machine
- Scale : 1:100
- Color classification : SKIP-HD-2.5 inch, SKIP-HD-3 inch
- Model Type : Finished Product
Introduction:
- SKIP HD is a revolutionary product of the toothpick flying machine. The toothpick frame is light and compact. It is mainly aimed at freestyle flying. It can also complete some tasks that traditional aerial photography aircraft cannot complete. It can shoot up to 1080P 60fp, which is very gorgeous moving. Moreover, it is small in size, and the wind resistance during flight is relatively small, and it can also be used for racing and crossing obstacles. It has good airflow, is safe, durable, and efficient. No matter where you are, you can have an exciting freestyle flight and record every wonderful moment.
- Powerful flight control module, GEP-12A-F4 flight controller, stable and high-performance computing STM32F411 chip with MPU6000 gyroscope to ensure flight stability and comfortable feel. Firmware target: MATEKF411 (MK41), built-in Betaflight OSD, integrated LC filter. The flight control has a silicone shock-absorbing structure, and the adjusted PID has a remarkable noise reduction effect.
- 2.5″ power configuration: GR1202 8000KV 3S Battery (Flexible)
- 3″ power configuration: GR1105 5000KV 3-4S Battery (Powerful and stable)
- SKIP HD is carefully assembled and debugged by the GEPRC team. After getting the BNF, it can fly as long as it is connected to the upper frequency. PNP needs its own receiver, and the receiver needs to support the Sbus protocol.
Characteristic:
- ultra light weight
- 2.5″ and 3″ optional
- HD video recorder Caddx baby turtle V2
- Reliable Electronics, Reduced Weight
- High-definition TPU printing
- Full 3K carbon plate
Parameter:
- SKIP HD 3″ version
- Model: SKIP HD 3″
- Control system: GEP-12A-F4
- ESC: 12A (BLheli_S)
- Rack: GEP-SP3
- Rack bottom plate thickness: 2.5mm
- Motor: GEPRC GEP-GR1105 5000KV (3S 450mAh – 4S 450mAh)
- Wheelbase: 118mm
- Propeller: 3inch two-blade propeller
- Image transmission: 5.8g 200mW
- Lens: Caddx baby turtle V2
- Weight: 72g (without battery)
- Recommended battery 450mAh 4S battery / 450mAh 3S battery (No included)
- Flight time: 5 minutes
Tips: SKIP HD 3 cannot use 3-inch three-blade propellers, only 3-inch two-blade propellers can be used, otherwise there will be a risk of burning the motor or ESC. The 3018 two-blade propellers that are equipped with the machine are the best .
SKIP HD 2.5″ version:
- Model : SKIP HD 2.5″
- Control system GEP-12A-F4
- ESC: 12A (BLheli_S)
- Rack: GEP-SP2.5
- Rack bottom plate thickness: 2.5mm
- Motor: GEPRC GEP-GR1202 8000KV(3S 450mAh)
- Wheelbase: 105mm
- Propeller: 2.5inch
- Image transmission: 5.8g 200mW
- Lens: Caddx baby turtle V2
- Weight: 63g (without battery)
- Recommended battery 450mAh 3S battery (not included)
- Flight time: 5 minutes
GEP-12A-F4 system:
- MCU: STM32F411
- Gyro: 6-Axis /accelerometer (SPI)
- OSD: BetaFlight OSD w/ AT7456E chip
- BEC Output: 5V@2A
- Screw hole distance: 25.5mm*25.5mm
- Battery input 2-4S LIPO
- Flight control firmware: MATEKF411
- Current: 12A
- ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, Etc.
- ESC firmware: Blheli_S G_H_30
- ESC Offset: 210
Image transmission 5.8G 200mW:
- Power : PIT/25/100/200mW
- Antenna interface: IPEX (UFL)
- Telemetry: IRC Tramp
- Integrated LC filter
You will also need the following equipment to fly:
- Remote control: you can choose : Frsky X9d and the like
- Video glasses: like FatShark V2
- Battery: 3S 300mAh battery is recommended for beginners
Include:
- 1 x SKIP HD Toothpick Traversing Machine
Single set does not include batteries! ! !
6
6